Lvl wood beam span tables manual#
Lvl wood beam span tables full#
Lvl wood beam span tables code#

Snow and wind loads should not include the Importance factor (O86 5.2.3. Information about Treated LVL Framing Lumber is from Pacific Wood Tech and for beam spans for double-1.5 material references this spans chart. Design must be verified by a qualified engineer. Where continuous joist members are used, the interior bearing supports shall be located within 2 feet (610 mm) of midspan of the cold-formed steel joists, and the individual spans shall not exceed the.

Lvl wood beam span tables code#

LVL is available through our network of UK distributors, for contact details of your nearest distributor visit our Distributor Map.Īlternatively, contact our Timber Systems Division team directly, individual contact details can be found in our Contacts section. Designed using WoodWorks® Sizer according to the National Building Code 2015 Part 4 and the CSA O86-14 Standard - Engineering design in wood. Floor joist size and thickness shall be determined in accordance with the limits set forth in Table R505.3.2 for single or continuous spans. LVL has excellent construction properties and is: (2) Spans for floor joists that are not selected from Tables A-1 and A-2 and that are required.

Lvl wood beam span tables manual#

For further details see the LVL technical manual below. (1) Except as required in Sentence (2) and Article 9.23.13.10., the spans for wood joists and rafters shall conform to the spans shown in Tables A-1 to A-7 for the uniform live loads shown in the Tables.

Lvl wood beam span tables full#

Our close relationship with Stora Enso provides James Jones & Sons Ltd with the confidence to offer a full range of LVL grades and billet sizes. JJLVL-Beam is a natural choice for highly loaded beams, whereas JJSLVL-Rim is the most cost-effective solution for rim material in timber frame structures. e-beam LVL is available in lengths up to 13.2m and in a range of thicknesses including 35mm, 45mm and 63mm with depths from 90mm to 400mm. The LVL that James Jones supplies to the market is available in two grades, JJLVL-Beam and JJLVL-Rim, and three standard thicknesses - 30, 45 and 75mm, with depths to match the full JJI-Joist range. 10 psf dead load l/ 360 deflection l/ 480 deflection l/600 deflection.

As a material, LVL is exceptionally strong with excellent load bearing capacity, homogeneous quality and good workability. Ultralam LVL 2.0E/2900psi Floor Joist Span Tables. LVL is an advanced wood product suitable for a wide range of structural applications, available in beam depths which complement our JJI-Joist range.